Bacteriological Incubator

Navigation: :> , Pharmaceutical Equipments> Bacteriological Incubator

Bacteriological Incubator

This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.

Send an Enquiry

Product Description

This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.

Technical Specifications:

  • Triple walled construction
  • Inner made of S.S.316 mirror polished
  • Outer made of S.S.304 Dull finish
  • Gap between the two walled filled with glass wool insulation of 65 mm
  • Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing
  • Heaters are placed at the right & left side of the inner chamber
  • PID Controller with auto tuning facility with double display to view set & current temp
  • Temp. Range 5 C above ambient to 60 C with accuracy of ± 0.5 C.
  • Silicon rubber gasket fitted on door to prevent lost of heat
  • Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali

Bacteriological Incubator GMP Model Is Available in Below Sizes:

Inner Size Size in Inches (W X D X H) No.of Shelves Capacity In LTR Rating Watts
12″x12″x12″ 1 27 250
14″x14″x14″ 2 42 300
18″x18″x18″ 3 90 400
18″x18″x24″ 4 120 700
24″x24X”24″ 4 215 1000
24″x24″x36″ 5 320 1500

Optional Accessories:

  • Digital Timer to cut off the heater at set interval
  • PID Controller with Printer interface to record
  • Set Valves & actual valves data & Time
  • 80 Column DOT MATRIX Printers
  • Safety controller with alarm for Temp. Overshoot
  • Single 4 point/8 point data logger

Product Enquiry